Comercial equipment / Fancoils

Hino (out of production)


Hino
Features
Marking

Hino series high pressure fan coils

High performance ducted fan coils is an effective solution for air-conditioning facilities of large premises or of the facilities with an extensive system of air distribution.  Thanks to the high-pressure centrifugal fans, duct fan coil units can feed the processed air in the working area via a complex system of ducts. This is especially important for the hall-type facilities, such as conference rooms, supermarkets, or spaces with complex configuration. Increased performance and efficient filtration system provides high-quality air treatment. The high pressure, in its turn, allows intake, supply and further distribution of the air via a complex duct system. High pressure duct fan coil units are designed for use in air conditioning systems with chilled water and designed for hidden installation, so that they can be installed in a false ceiling or in a building, which is located at a distance from the work area.

Housing:
For the outer shell high-quality 1 mm galvanized steel is used. For mounts of the heat exchanger and the motor base 1mm thick steel is used, which ensures maximum rigidity and reliability of the design. Also, the bottom panel has two independent sections, which allows for easy maintenance.
Heat exchanger:
Made of drawn copper tubes with seamless method, equipped with aluminium fins with the Blue Fin anticorrosive coating. Also, each heat exchanger undergoes a thorough final inspection to ensure maximum reliability.

Collectors:
High-quality brass collectors with special design reducing hydraulic resistance. Air vent is built-in at the factory and is included in standard configuration. Each collector is equipped with a protective bracket that protects the collector from accidental damage during installation.

Fan:
Low noise centrifugal with forward curved blades. Operating wheel and fan motor are dynamically and statistically balanced in two planes.
Motor:
Three-speed asynchronous motors with permanent separation capacity (PSC) are used. These motors have optimum efficiency and high power factor, which ensures energy saving. Also, this type of motor is the most reliable and easy to use.

Air Filter:
A standard filter is made of washable synthetic polypropylene 3-5 mm thick with an aluminium frame. In the high-power models double filters are used to improve the quality of treatment. Aluminium fine filters are available on request. The filter can be easily removed from the bottom of the installation.

Drain pan:
Standard drain pan is made of high carbon steel without welding, which prevents corrosion, and is provided with 5 mm insulation, which eliminates condensate formation on the outside part of the unit. Standard pan is installed inside the housing. Trays with increased volume are also available on request.

Basic configuration:

  • Heat exchanger hydrophobic coating;
  • Terminal box for connection of control devices;
  • Three-speed high-pressure fan;
  • Drain pan;
  • Left or right connection;
  • Double cartridge filter.

Options:

  • Compact thermostat;
  • Wall-mounted thermostat with LCD;
  • Set for the connection of a 2-way or a 3-way valve.
  • Additional electric heater;
  • Additional water type heat exchanger (4-pipe version);
  • Corrosive resistant powder coating of the housing.